For best sound system in your car, we recommend buying a car stereo amplifier installation to provide power to the speakers. If you prefer to use a subwoofer, you also have to take one more for this. Here's how you park your car stereo amplifier yourself, so you can save money for the installation.

First, you must choose to make your new car stereo amplifier down. If you add a subwoofer is the best, youthem in the trunk near the place where it closed. If you want to reinforce the main speaker amplifier car stereo, so that the best place is under the passenger seat.

You must have the following lines are available – an electric cable thickness (total wattage of your amplifier to verify that you know you get. And 'better if you consult with a representative of the turn of the amplifier hand), which will come from battery stereo amplifier, 3 metersground wire that is equal to the diameter of electrical cable, a signal via RCA cable, which carries the left and right signals from the main stereo amplifier.

If you want to reinforce the main speakers, you need a 16 meter rope will reach from all the speakers to the amplifier. When you install the following tools with you: screwdrivers, wire stripper, wire cutters, sandpaper, a knife, adhesive tape with a pen for marking, and a contraction of the O-ring.

You also need a shrink for 2 –Spade connector when you connect the stereo amplifier for each speaker. Disconnect the ground wire from the battery. Never work on the electrical system in the car when it was still connected. E 'for your safety. Run the electrical cable through the firewall on your machine.

There is an opening on the driver's side. This is achieved through the amplifier. After hours in the back, so it's better than having the wire with plastic molds, runningFound along the bottom edge of your car. Wires and cables to run, and not bind.

Finally, all the car stereo amplifier. Strip as much as possible at the end of each wire to connect really solid and stable. They have no exposed cord. If there is, then the amplifier with the speaker cable to 12 meters.

Related posts:

  1. The Big 3 Car Audio Wiring Upgrade
  2. Car Stereo Connection 101 – A must read!
  3. How to Install Your Car Stereo
  4. Things that you need a Head unit installation
  5. How to install a head
  6. How to install an amplifier
  7. Amp motor – for a clear sound and consistent
  8. Components of the Car Stereo Equipment, Explained
  9. How to install car speakers
  10. 3 Car Stereo Components – Tips and together
This entry was posted on Wednesday, January 20th, 2010 at 6:10 am and is filed under Car Stereos Articles. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

Comments are closed at this time.